===== LSC Smart Connect Power Plug =====

Prise LSC Smart Connect Power Plug Smart

Art. nr. 2578677

Install Docker


  sudo apt install git network-manager
  git clone https://github.com/tuya-cloudcutter/tuya-cloudcutter.git
  
Download Last OpenBK firmware from [[https://github.com/openshwprojects/OpenBK7231T_App/releases]] "BK7231T	CCtr Flash" Release into tuya-cloudcutter/custom-firmware


  sudo ./tuya-cloudcutter.sh
  
Vérifier
  [!] WARNING: Selected wifi AP support: oui

  

Choose  
  2) Flash 3rd Party Firmware

Select Firmware, normally only one.


Choose

  By firmware version and name

Select  
  > 1.1.8 - BK7231T / oem_bk7231s_rnd_switch
  > TreatLife
  > SS01S Single Pole Smart Light Switch
  
Press Power Button for > 5sec once, blinking fast then press again for >5sec.


Then when asking to do it again, redo the same twice long press(Can be quite long)

  Scanning for open Tuya SmartLife AP

Wait for Fimware Flash Complete.

Then connect to Wifi, then browse http://192.168.4.1/ and config

  #Configure Name
  
  #Configure Wifi

  # Configure Module
  P6 (PWM0) LED 0
  P7 (PWM1) Btn 0
  P8 (PWM2) Rel 0
  P26 (PWM5) WifiLED
  
  # Configure General/Flags
  Flag 6 - [BTN] Instant touch reaction instead of waiting for release (aka SetOption 13)
  
[[https://github.com/tuya-cloudcutter/tuya-cloudcutter]]


[[https://github.com/tuya-cloudcutter/tuya-cloudcutter.github.io/tree/master/devices]]


[[https://www.elektroda.com/rtvforum/topic3943688.html#20350582]]