My Stuff

Outils pour utilisateurs

Outils du site

Piste : • plomberie • msprdv
pinout:wemosd1

Différences

Ci-dessous, les différences entre deux révisions de la page.

Lien vers cette vue comparative

Les deux révisions précédentesRévision précédente
Prochaine révision		Révision précédente
pinout:wemosd1 [2021/01/16 14:52] – ptitfrappinout:wemosd1 [2021/01/16 14:55] (Version actuelle) – ptitfrap
Ligne 4: Ligne 4:
  
 ^Label ^GPIO ^Input ^Output ^Notes^ ^Label ^GPIO ^Input ^Output ^Notes^
-|  D0  |GPIO16 |no interrupt|no PWM or I2C support |HIGH at boot \\ used to wake up from deep sleep|+|  D0  |GPIO16 |no interrupt|no PWM or I2C support |<color white/orange>HIGH at boot</color> \\ used to wake up from deep sleep|
 |  D1  |GPIO5 |<color white/green>OK</color>|<color white/green>OK</color>|often used as SCL (I2C)| |  D1  |GPIO5 |<color white/green>OK</color>|<color white/green>OK</color>|often used as SCL (I2C)|
 |  D2  |GPIO4 |<color white/green>OK</color>|<color white/green>OK</color>|often used as SDA (I2C)| |  D2  |GPIO4 |<color white/green>OK</color>|<color white/green>OK</color>|often used as SDA (I2C)|
 |  D3  |GPIO0 |pulled up|<color white/green>OK</color>|connected to FLASH button \\ boot fails if pulled LOW| |  D3  |GPIO0 |pulled up|<color white/green>OK</color>|connected to FLASH button \\ boot fails if pulled LOW|
-|  D4  |GPIO2 |pulled up|<color white/green>OK</color>|HIGH at boot \\ connected to on-board LED \\ boot fails if pulled LOW|+|  D4  |GPIO2 |pulled up|<color white/green>OK</color>|<color white/orange>HIGH at boot</color> \\ connected to on-board LED \\ boot fails if pulled LOW|
 |  D5  |GPIO14 |<color white/green>OK</color> |<color white/green>OK</color> |SPI (SCLK)| |  D5  |GPIO14 |<color white/green>OK</color> |<color white/green>OK</color> |SPI (SCLK)|
 |  D6  |GPIO12 |<color white/green>OK</color> |<color white/green>OK</color> |SPI (MISO)| |  D6  |GPIO12 |<color white/green>OK</color> |<color white/green>OK</color> |SPI (MISO)|
 |  D7  |GPIO13 |<color white/green>OK</color> |<color white/green>OK</color> |SPI (MOSI)| |  D7  |GPIO13 |<color white/green>OK</color> |<color white/green>OK</color> |SPI (MOSI)|
-|  D8  |GPIO15 |pulled \\ to GND |OK |SPI (CS) \\ Boot fails if pulled HIGH| +|  D8  |GPIO15 |pulled \\ to GND |<color white/yellow>OK</color>|SPI (CS) \\ Boot fails if pulled HIGH| 
-|  RX  |GPIO3 |OK |RX pin |HIGH at boot| +|  RX  |GPIO3 |<color white/yellow>OK</color>|<color white/red>RX pin</color>|<color white/orange>HIGH at boot</color>| 
-|  TX  |GPIO1 |TX pin |OK |HIGH at boot debug output at boot \\ boot fails if pulled LOW| +|  TX  |GPIO1 |<color white/red>TX pin</color>|<color white/yellow>OK</color> |<color white/orange>HIGH at boot</color> \\ debug output at boot \\ boot fails if pulled LOW| 
-|  A0  |ADC0 |<color white/green>Analog Input</color> |X |+|  A0  |ADC0 |<color white/green>Analog Input</color> |<color white/red>X</color>|
 [[https://randomnerdtutorials.com/esp8266-pinout-reference-gpios/|Source]] [[https://randomnerdtutorials.com/esp8266-pinout-reference-gpios/|Source]]
pinout/wemosd1.1610805161.txt.gz · Dernière modification : 2021/01/16 14:52 de ptitfrap