Différences

Ci-dessous, les différences entre deux révisions de la page.

--- pinout_d1 [2021/01/16 11:05] – ptitfrap
+++ pinout_d1 [2021/01/16 11:18] (Version actuelle) – supprimée ptitfrap
@@ Ligne 1: / Ligne 1: @@
-{{ :esp8266-wemos-d1-mini-pinout-gpio-pin.png?600 |}}
-^Label	^GPIO	^Input	^Output	 ^Notes^
-|D0	|GPIO16	|no interrupt	|no PWM or I2C support	|HIGH at boot used to wake up from deep sleep|
-|D1	|GPIO5	|OK	|OK	|often used as SCL (I2C)|
-|D2	|GPIO4	|OK	|OK	|often used as SDA (I2C)|
-|D3	|GPIO0	|pulled up	|OK	|connected to FLASH button, boot fails if pulled LOW|
-|D4	|GPIO2	|pulled up	|OK	|HIGH at boot connected to on-board LED, boot fails if pulled LOW|
-|D5	|GPIO14	|OK	|OK	|SPI (SCLK)|
-|D6	|GPIO12	|OK	|OK	|SPI (MISO)|
-|D7	|GPIO13	|OK	|OK	|SPI (MOSI)|
-|D8	|GPIO15	|pulled to GND	|OK	|SPI (CS) Boot fails if pulled HIGH|
-|RX	|GPIO3	|OK	|RX pin	|HIGH at boot|
-|TX	|GPIO1	|TX pin	|OK	|HIGH at boot debug output at boot, boot fails if pulled LOW|
-|A0	|ADC0	|Analog Input	|X	|
-[[https://randomnerdtutorials.com/esp8266-pinout-reference-gpios/|Source]]