My Stuff

LSC Smart Connect Power Plug

Prise LSC Smart Connect Power Plug Smart

Art. nr. 2578677

Install Docker

sudo apt install git network-manager
git clone https://github.com/tuya-cloudcutter/tuya-cloudcutter.git

Download Last OpenBK firmware from https://github.com/openshwprojects/OpenBK7231T_App/releases “BK7231T CCtr Flash” Release into tuya-cloudcutter/custom-firmware

sudo ./tuya-cloudcutter.sh

Vérifier

[!] WARNING: Selected wifi AP support: oui

Choose

2) Flash 3rd Party Firmware

Select Firmware, normally only one.

Choose

By firmware version and name

Select

> 1.1.8 - BK7231T / oem_bk7231s_rnd_switch
> TreatLife
> SS01S Single Pole Smart Light Switch

Press Power Button for > 5sec once, blinking fast then press again for >5sec.

Then when asking to do it again, redo the same twice long press(Can be quite long)

Scanning for open Tuya SmartLife AP

Wait for Fimware Flash Complete.

Then connect to Wifi, then browse http://192.168.4.1/ and config

#Configure Name

#Configure Wifi

# Configure Module
P6 (PWM0) LED 0
P7 (PWM1) Btn 0
P8 (PWM2) Rel 0
P26 (PWM5) WifiLED

# Configure General/Flags
Flag 6 - [BTN] Instant touch reaction instead of waiting for release (aka SetOption 13)

https://github.com/tuya-cloudcutter/tuya-cloudcutter

https://github.com/tuya-cloudcutter/tuya-cloudcutter.github.io/tree/master/devices

https://www.elektroda.com/rtvforum/topic3943688.html#20350582