My Stuff

Ceci est une ancienne révision du document !

LSC Smart Connect Power Plug

Install Docker

sudo apt install git network-manager
git clone https://github.com/tuya-cloudcutter/tuya-cloudcutter.git

Download Last OpenBK firmware from https://github.com/openshwprojects/OpenBK7231T_App/releases “BK7231T CCtr Flash” Release into tuya-cloudcutter/custom-firmware

sudo ./tuya-cloudcutter.sh

Vérifier

[!] WARNING: Selected wifi AP support: oui

Choose

2) Flash 3rd Party Firmware

Select Firmware, normally only one.

Choose

By firmware version and name

Select

> 1.1.8 - BK7231T / oem_bk7231s_rnd_switch
> TreatLife
> SS01S Single Pole Smart Light Switch

Press Power Button for > 5sec once, blinking fast then press again for >5sec.

Then when asking to do it again, redo the same twice long press(Can be quite long)

Scanning for open Tuya SmartLife AP

1.1.8 BK7231T / oem_bk7231s_rnd_switch and SS01S Single Pole Smart Light Switch (TreatLife)

PINs
As this is a very basic plug, there is not much configuring.
PIN6 LED_n 1
PIN7 Btn 1
PIN8 Rel_1 1
PIN26 Wifi