My Stuff

Ceci est une ancienne révision du document !

LSC Smart Connect Power Plug

Install Docker

sudo apt install git network-manager
git clone https://github.com/tuya-cloudcutter/tuya-cloudcutter.git

Download Last OpenBK firmware from https://github.com/openshwprojects/OpenBK7231T_App/releases “BK7231T CCtr Flash” Release into tuya-cloudcutter/custom-firmware

sudo ./tuya-cloudcutter.sh

Vérifier

[!] WARNING: Selected wifi AP support: oui

Choose

2) Flash 3rd Party Firmware

Select Firmware, normally only one.

Choose

By firmware version and name

Select

> 1.1.8 - BK7231T / oem_bk7231s_rnd_switch
> TreatLife
> SS01S Single Pole Smart Light Switch

Press Power Button for > 5sec once, blinking fast then press again for >5sec.

Then when asking to do it again, redo the same twice long press(Can be quite long)

Scanning for open Tuya SmartLife AP

Wait for Fimware Flash Complete.

Then connect to Wifi, then browse http://192.168.4.1/ and config

1.1.8 BK7231T / oem_bk7231s_rnd_switch and SS01S Single Pole Smart Light Switch (TreatLife)

PINs
As this is a very basic plug, there is not much configuring.
PIN6 LED_n 1
PIN7 Btn 1
PIN8 Rel_1 1
PIN26 Wifi